Quick Adapter Features:
- Set of 2 color coded straight quick connectors
- Blue: Low side quick connector/adapter ( 1/4″ SAE male flare )
- Red: High side quick connector/adapter ( 1/4″ SAE male flare )
- Sold brass metal construction
- Capped Flares
- Coupler interface fits with R134 service ports,1/4″ male flare
- Quick,easy connect/disconnect, high flow
R134a Brass Adapter 1/4″ Male to 1/2″ ACME Female Charging Hose to Vacuum Pump
- 1/4″ Male x 1/2″ ACME Female
1/4 HP Single Stage Rotary Vane Vacuum Pump w/ Oil HVAC AC Gas R134a R410a
- Aluminum ALLOY CASING: Alloy casing has high heat – dissipation keeping motor and pump cool, light weight and efficient.
- Single-Stage Rotary Vane Vacuum Pump
- Direct drive motor allowing easy starting and is maintenance free.
- Direct coupling between the motor and pump results in quiet running and good performance.
- FORCE FED LUBRICATION Provides clean, filtered oil to all internal bearings and wearing surfaces regardless of the pump operation. Cleaner oil reduces ware and break downs.
- Good for: home and auto AC system evacuation, bell jar, desiccators, jewellery making/gluing jobs etc.
- Oil Capacity: 7 oz(220 ml)
- Come with a bottle of vacuum oil, just dump it in, you are ready to go!
- Oil drain valve positioned at bottom of oil reservoir.
- SPECIFICATION:
POWER SUPPLY :110 VOLT 60hz
PUMPING RATE: 2.5 CFM - LIMITED PRESSURE(Pa): 10
POWER: 1/4 HP 1720RPM
WEIGHT: 16 Lb
10-3/4″ L x 4.5″ W x 7″H (with out the handle) with handle 9″ H - Power cord: 5ft with 3-prong plug (UL North America standard: 15 A/125 VAC);
- power switch on the pump.
HVAC MANIFOLD GAUGE
- Large 2 1/2 ” diameter easy-to-read, dual gauges,
- mounted on Brass body
- with Large sight viewing glass
- with rubber shield cover on the gauges to absorb physical shock
- Large easy-to-grab hand-knobs on the sides
- Large port/ less restriction for fast recovery or charging,
- Pressure in PSIG
- 3 brass hose anchors on back of the gauge for the hose ends to attach to, prevent dirt getting into hoses.
- Temperature in C for R22, R12,, R502
- this can used for R134a but does not have R134a Reading
- a heavy duty hook for hanging the gauges
Freon Charging Hose 2500PSI Burst 500PSI Max w.p. 5ft Hoses
- 60 inch ling each
- 2500 PSI burst pressure
- 500 PSI working pressure
- 1/4″ female SAE brass fitting to the gauge block
- 1/4″ female SAE brass fitting to the system ports.
- 45 degree angle on the service port site for easier access