Heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components. Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone. Clear lid allows for you to see air being vacuumed out of your resin mix. Built-in valve and gauge provides ease of use and convenience. Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg. This vacuum chamber is perfect for degassing silicone, epoxy resin, solvents and more!1/3HP 5CFM Single Stage Vacuum Features:
- High Efficiency & Low Noise
- Heavy-duty Aluminum Alloy Casing
- Direct Drive Motor Allowing Easy Starting and is Maintenance Free
- Oil Sight Glass for Monitoring Oil Levels
- With Oil Drain Plug Positioned at Bottom of Oil Reservoir
- Internal High Volume Cooling Fan for Extended Use
- Exhaust Port with Exhaust Cap
- ON/OFF Switch
- Non Slip Cushion Handle
- Includes a Bottle of Vacuum Oil “FREE”
Specifications:
- Power Voltage110V, 60HzMotor Power1/3HP, 5 CFMPump Speed1720 RPMOil Capacity250mlMicro Rating75 Microns (10pa)
5 Gallons (21 Liter) Chamber Features:
- Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time
- Heavy duty 3/4″ shatter resistant acrylic crystal lid allows you to see inside and bulletproof
- Hydro-tested stainless steel container is high strength, very durable and withstands up to 160ºF
- Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg.
- 5 foot collapse-proof steel wire reinforced hose easily withstands any vacuum pressure you throw at it and features
- Both the release valve and ball valve are built into a single unit for ease of use
- Durable brass fittings fit all vacuum pump ports
- 50 micron air filter reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber
- 4.75″ x 4.75″ non stick silicone pad allows you to easily remove resin mixes
- Max vacuum rated to 29.9inHg at sea level
- Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc.
Specifications:
- Maximum Rated Vacuum29.9inHg @ sea level / 24.82 @ 5000ftHose Connector1/4″ SAE w/ 45º SeatChamber Max Temp160ºFGauge StyleGylcerin FilledSilicone Pad Size
Chamber Dimension10-7/8″ x 11-7/8″ (Without Lid)Overall Dimension11-5/8″ x 12-5/8″
Includes:
- 1 x 3 Gallon Vacuum Chamber
1 x 3/4″ Acrylic Lid
1 x Heat Treated Silicone Lid Gasket
1 x Glycerin Filled Gauge with Brass Fittings
1 x 50 Micron Air Filter
1 x Non-Stick Silicone Pad
1 x 5 Foot Steel Wire Collapse-Proof Hose
1 x Instruction Manual
1 x 1/3HP 5CFM Single Stage Vacuum Pump
1 x Bonus Vacuum Oil