Operating conditions:
-Liquid temperature up to 40 o C
-Submersion depth 40m
-Minimum internal diameter of well: 102mm.
-Continuous duty.
Motor:
-Tow-pole induction motor (n=3450r.p.m)
-Built-in over load motor protector ( this will kick the breaker when over heating if using in muddy or sand water) Only used for Clear Water.
-Insulation Class B/F
-Protection IP68
Material:
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Ceramic/Graphite
Application:
-Multistage submersible water pumps with radial closed impeller conceived in order to solve any problem of clean water conveyance.
-Suitable for irrigation, and pressure systems and pressure systems and generally for civil and industrial purposes.For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation.**PROFESSIONAL ELECTRICIAN INSTALLATION RECOMMENDED
- This pump is only for Clear water pump. Will not work on Muddy clouded water, will cause motor to freeze.
- Industrial standard, stainless steel housing
- Brass outlet (discharge): 2″
- 3hp 2200W, 3450 RPM ****MUST INSTALL WITH 25AMP BREAKER**
- 220v 60hz Require 25amp dedicate breaker.
- Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, 20uf/450v capacitor in the box.
- 100 ft wire included
- Max dept: 393 ft (120M)
- Max Capacity Flow: 1050 GPH(4000 L/H)
- Diameter is 4 “
- Aprox 40″ length