Self Prime 110v AC 16GPM Oil Transfer Pump Fuel Diesel Kerosene Biodiesel 60
These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel.
The primary function of this pump is for fueling vehicles with an automatic nozzle (nozzle Not included) . The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped (usually by a nozzel) The pump should not be left on for a long period of time when restricted, as it will wear down the vanes, but it is ok for normal usage.
Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread, most NPT fittings can be made to fit when using yellow teflon tape.
- Contruction: Cast Iron
- Induction Motor with aluminum casing
- In Built Fitler Easily accessible for cleaning
- With self priming pump and bypass valve.
- Motor: 110V AC 370Watts 60hz Self Priming
- Flow Rate: 20-60L/Min (5.25-15.75 GPM)
- Max Pressure: 44PSI (3Bar)
- Suction Height: 5m (16ft)
- max Lift: 10m 32ft
- Continous Duty Cycle
- 5" x 9-3/8" x 6-1/4" H